 |
||
|
||
Well Services |
| CROSCO’s equipment is capable of operating in extreme well conditions with pressures up to 1,100 bar (15,600 psi), temperatures up to 235°C (455°F) and with high contents of CO2 and H2S. Onshore services were introduced in 1966 and offshore services in 1978. |
Description of our well services Equipments
| Downhole and Surface pressure/temperature gauges and instruments | |
| DST Service | |
| Slickline and Monoconductor Cable Services | |
| Welltest Services |
Cementing & Stimulation Services
> large diameter bore cementing
> primary cementing
> linear cementing
> squeeze cementing
> plugs cementing STIMULATION
> acid wasing & matrix acidizing
> acid fracturing
> fracturing
> gravel packing
> carbon dioxide jet perforating & cutting
| Cementing equipment | Stimulation equipment |
| Cementing services | Stimulation services |
| Cementing storage base | Stimulation storage base |
Well logging Services
Well logging services are performed with nine fully computerized mobile and skid units, two Mast Trucks and two Grease Injection Systems. Equipment and training has been obtained from well known and reputable manufacturers. CROSCO provides any type of wireline logging and perforating services including: open hole, cased hole, production logging, explosive services, bore hole seismic services as well as analysis of logging and related data. CROSCO also has a small unit especially equipped for slim-hole and water production boreholes. Surface electronics and logging sondes are the state of art products related especially to protection of environment. Units are equipped to work in all climatic conditions and are rated up to 7,000 m (22,966 ft) and temperatures of over 177°C (350°F). The reliability of all equipment is guaranteed by a fully equipped laboratory and a test well. Complete formation evaluation along with confidence curves, data quality curves, tool operation curves and a logging event file are available to the client. If special requirements exist, suitable equipment can be obtained. CROSCO has conducted over 27,000 logging and perforating services since Well logging services were introduced onshore in 1948 and offshore in 1972.
Well logging services are performed with nine fully computerized mobile and skid units, two Mast Trucks and two Grease Injection Systems. Equipment and training has been obtained from well known and reputable manufacturers. CROSCO provides any type of wireline logging and perforating services including: open hole, cased hole, production logging, explosive services, bore hole seismic services as well as analysis of logging and related data. CROSCO also has a small unit especially equipped for slim-hole and water production boreholes. Surface electronics and logging sondes are the state of art products related especially to protection of environment. Units are equipped to work in all climatic conditions and are rated up to 7,000 m (22,966 ft) and temperatures of over 177°C (350°F). The reliability of all equipment is guaranteed by a fully equipped laboratory and a test well. Complete formation evaluation along with confidence curves, data quality curves, tool operation curves and a logging event file are available to the client. If special requirements exist, suitable equipment can be obtained. CROSCO has conducted over 27,000 logging and perforating services since Well logging services were introduced onshore in 1948 and offshore in 1972.
Clients
(c) 2011 Crosco-Delemas Amira Drilling Nigeria Limited.